Filter
Top Products
97-0019-01-01 61
Configuring the Freedom SW using the SCP
Resetting the Freedom SW to Default Settings
The
Restore Defaults
command returns the Freedom SW to factory
default settings. After using the
Restore Defaults
command, the
Freedom SW is no longer configured for the power system.
To restore Freedom SW default settings:
1. On the Adv Settings menu, select Restore Defaults.
Warning W252 appears, asking to confirm the command.
2. To cancel the command, press Func. To continue with the
Restore Defaults command, press Enter.
IMPORTANT:
If a warning is already active in the system, selecting
Restore Defaults brings up the Warnings list, with warning W252 at
the top. Press Enter to view W252 and continue with the restore defaults
process.
EQUIPMENT DAMAGE
Do not restore defaults while the Freedom SW is operating. De-energize
the power system and disconnect the Freedom SW AC input before
restoring defaults. Reconfigure the Freedom SW before reconnecting the
AC input and re-energizing the power system.
Failure to follow these instructions can damage the unit and/or
damage other equipment.
Freedom SW 3K2K InvChg Owners Guide.book Page 61 Thursday, July 31, 2014 1:42 PM