Filter
Top Products
28 Freedom SW Owner’s Guide
Operating the Freedom SW with the SCP
Setting the Time and Date
Freedom SW advanced features such as time-stamped events
(faults, warnings, and logged historical data) require that the system
be set to the correct time. The Xanbus SCP has an internal clock that
controls the time for all Xanbus-enabled devices in the system. You
can set the time, time format, and date on the Clock menu.
The Clock menu is accessible on the Select Device menu.
For more information, see refer to the Xanbus SCP Owner’s Guide.
Using the STBY/ON Fault Clear Button
The STBY/ON Fault Clear button has two functions.
The STBY/ON Fault Clear is used to clear active faults on the
system if pressed momentarily. It also toggles all Xanbus-enabled
devices on the system between Operating and Standby (Power
Save) mode when held down for more than five seconds.
Figure 15 Xanbus SCP STBY/ON Fault Clear Button
Xanbus System Control Panel(SCP)
FGA:809-0 921
ACIn/Charge
Inverter On
Low Batt er y
Fa ult
STBY/ON
Faul tCl ear
TM
Enter Func
STBY/ON Fault Clear
Button
Freedom SW 3K2K InvChg Owners Guide.book Page 28 Thursday, July 31, 2014 1:42 PM