Filter
Top Products
97-0019-01-01 45
Configuring the Freedom SW using the SCP
Changing Freedom SW Advanced Settings
Advanced Settings menu The advanced settings option gives
you access to the full range of Freedom SW settings, including
everything displayed on the basic menu. As a safeguard against
unintended advanced configuration, the Xanbus SCP displays the
basic settings by default. To view the advanced settings, you must
perform a special keypress (see “Selecting Advanced Settings From
the Device Setup Screen” on page 46).
The Freedom SW advanced settings include menus for configuring:
• Inverter settings (see page 49)
• Charger settings (see page 51)
• AC transfer limit settings (see page 55)
• Generator support settings (see page 56)
• Stacking operation, including customizing the default model
name of the Freedom SW, and setting its network device
number. Setting the device number is important when two
Freedom SWs are on the Xanbus network and sharing
connections such as AC loads, utility grid, and generator. The
device number is also used when configuring paralleled
Freedom SWs for Master-Slave operation (see page 57)
• Restoring default settings (see page 61) and other advanced
features (see page 62)
Freedom SW advanced menu screen lists status information and
settings which require that you understand and plan for the changes
you make. You may not have to adjust these settings as part of
regular operation.
The SCP shows the Freedom SW basic menu by default. To view
the advanced settings menu, you have to activate it by following the
procedure below.
NOTE:
This keypress enables the advanced settings for every device in
the system. After performing the keypress, Advanced Settings
appears in the list and Basic Settings disappears.
FIRE AND ELECTRICAL SHOCK HAZARD
Familiarize yourself with advanced settings and the system-wide impact of
changing those settings. The advanced settings are intended for qualified
installation/service personnel only. Setting parameters incorrectly could damage
connected equipment (such as batteries) or could severely affect the performance
of your system. Incorrect charging configuration can lead to battery damage and
risk of fire.
Failure to follow these instructions can result in minor or moderate
injury.
Freedom SW 3K2K InvChg Owners Guide.book Page 45 Thursday, July 31, 2014 1:42 PM