Filter
Top Products
30 Freedom SW Owner’s Guide
Operating the Freedom SW with the SCP
Reading the Freedom SW Device Setup Screen
The Freedom SW Device Setup menu screen displays real-time
operational data (status information) specific to the Freedom SW.
The Freedom SW status changes according to the states described in
Table 4, “Freedom SW Device Setup Screen Operating States
(Modes)” on page 32.
The Freedom SW Device Setup menu screen has two segments.
The first segment (lines 2 to 5) displays status information and
appears first in the screen’s initial four lines. The second segment
(lines 6 to 15) contains selectable fields when the Down arrow
button is pressed (scrolling down the device setup screen). These
selectable fields are configurable, meaning their values can be
changed from within the setup screen or they bring up another
screen (another level of configuration). For information on how to
configure the Freedom SW inverter/charger, see “Configuring the
Freedom SW using the SCP” on page 33.
To view the Freedom SW Setup menu screen:
1. On the Select Device screen, press the Down arrow button
until the FSW3012 00
1
is highlighted.
2. Then, press Enter to display the FSW3012 00: Setup screen
which is the device setup menu screen.
3. Press the Up and Down arrow buttons view status information
fields and move between selectable fields.
1.Typical device ID for a single installed Freedom Inverter/Charger. The second unit
has a device name FSW3012 is followed by 01.
FSW3012 00: Setup
Mode
Battery
Load
AC In
Invert
11.8V -88.0A N/A
900W 120V 7A
0V 0A 0Hz
Select Device
System Settings
FSW3012 00
XAGS 00
XSCP
1 Scroll down
using the Down
arrow button.
2 Press Enter
to bring up the
device setup
screen.
3 Press these
buttons to scroll
up and down the
Device Setup
fields.
Freedom SW 3K2K InvChg Owners Guide.book Page 30 Thursday, July 31, 2014 1:42 PM