Filter
Top Products
12
USER INSTRUCTIONS
• Lift out the riddling mechanism and remove all ash
• Replace riddling mechanism when cleaning is complete
16.3 Glass cracking:
Do not over tighten the screws on the glass clips when
replacing the glass as this causes stress and the intense
temperature changes can cause the glass to crack. For
replacement glass contact your local Stovax dealer.
16.4 Appliance is producing tar:
This is identified by:
• A very strong pungent smell shortly after the appliance is
lit and heats up
• Glass blackening
• Thick, brown and sticky tar oozes from the pipe joints
This is caused by burning damp wood and burning your
appliance at too low a temperature;
• Use well seasoned wood and operate the appliance in the
ideal temperature range
Tar is a major cause of chimney fires - if you experience
problems with tar build up consult a chimney sweep before
continued use of your appliance.
Ideal working temperature range is 130°C and 240°C
(270°F – 465°F). Failing to close down the primary air
control once the appliance has heated up to this range may
cause the appliance to over-fire and to exceed the ideal
temperature range. Over-firing can cause permanent
damage to the appliance and invalidates your warranty.
16.5 In the unlikely event of a problem that cannot be solved
by these tips contact your installer or dealer for help.