43
ZMB 30CST
Service and spare parts
If the appliance does not function correctly, please carry out the following
checks before contacting your local Service Force Centre.
If the oven does not come on:
• Check the appliance is connected correctly.
• Check that the oven is plugged in properly.
• Replace the fuse in the plug, if required, with another of the same rating and
check that the plug has been wired correctly.
• Check that the socket switch and/or the switch from the mains supply to the oven are ON.
• Check that the socket is receiving power, by plugging in an appliance you
know to be working.
• Check that the the fuse in the fuse box is intact.
If the microwave does not function:
• The child safety lock may have been set.
• Check the controls are set correctly.
• Check settings/procedures against the instruction booklet.
• Check the door closes properly (if food particles or other objects have become stuck
inside the door, it will not close properly and microwave cooking will not take place).
• Check the start button has been depressed.
If after carrying out the above checks, the oven still does not function correctly,
contact your local Zanussi Service Centre.
IMPORTANT:
If you call out an engineer to a fault listed above, or to repair a fault caused
by incorrect use or installation, a charge will be made even if the appliance
is under guarantee.