32 Configuring PAD/ATPAD Ports
PAD Profile Table Record
#7, Break Signal Operation
Range: 0, 1, 2, 4, 5, 8, 21
Default: 2
Description: Selects the PAD mode of operation when a break signal from the
attached device is received:
• 0: Do nothing.
• 1: Send Interrupt packet.
• 2: Send Reset packet
• 4: Send Indication of Break packet.
• 5: Send Interrupt packet and Indication of Break packet.
• 8: Escape from data transfer state; return to Command Mode.
• 21: Discard output; send Interrupt packet and Indication of
Break packet.
#9, Padding After Carriage Return
Range: 0 to 255
Default: 0
Description: Controls padding after <CR>:
• 0: No padding after <CR>. Use this when sending to a CRT.
• 1 to 255: The number of padding characters inserted after
<CR>
Select at least one padding character. When the data is sent to a
printer, the padding characters interrupt the data stream until the
print head is ready for the next line of text.
#10, Line Folding
Range: 0 to 255
Default: 0
Description: Controls line folding:
• 0: No line folding
• 1 to 255: Number of characters per line
