34 Configuring PAD/ATPAD Ports
PAD Profile Table Record
#14, Padding after LF
Range: 0 to 255
Default: 0
Description: Controls padding after <LF> in Data
Mode:
• 0: No padding after <LF>
• 1 to 255: The number of padding
characters inserted after <LF>
Select at least one padding character
when a printer receives data, as the
padding characters interrupt the data
stream until the print head is ready for
the next line of text.
#15, Editing
Range: 0, 1
Default: 1
Description: • 0: No editing
• 1: Allow editing
Note
If set to 1, parameter #4, Idle Timer Delay must be 0. If set to 0,
parameters #16 Character Delete, #17 Line Delete, and #18 Line
Display are disabled.
#16, Character Delete
Range: 0 to 127
Default: 8 (backspace or <CNTRL>H)
Description: Specifies the decimal value of the ASCII character used to delete a
character when #15 Editing = 1.
#17, Line Delete
Range: 0 to 127
Default: 24 (<CNTRL>X)
Description: Specifies the decimal value of the ASCII character used to delete a
line (when #15 Editing = 1)
