40 Configuring PAD/ATPAD Ports
PAD Profile Table Record
#109, Form Feed Padding
Range: 0 to 255
Default: 0
Description: Specifies the number of padding characters inserted in the data
sent to the attached device after a form-feed <FF>:
• 0: No padding characters inserted.
• 1 to 255: Number of padding characters to insert after
form-feed.
#110, Esc Forwarding Delay Handling
Range: 0 to 255
Default: 0
Description: Specifies the delay (in 1/20th second increments) after the <ESC>
sequence is detected. This delay ensures that all characters
involved in an ESC sequence reach an X.25 host in the same
packet.
• Select a value that is greater than the time it takes the terminal
to send the <ESC> sequence, yet small enough so the <ESC>
sequence is sent as soon as possible.
• Refer to your terminal manual to determine the length of the
longest sequence.
• When this parameter is set, the escape sequence is sent as a
single packet to allow the host to recognize it in the normal
manner.
Note
Entering zero (0) disables this function.
