40
E
Operation
When the ignition key is turned from ON to OFF, the
immobilizer system activates the engine lock. When the
ignition key is turned from OFF to ON to start the engine:
1) if the code is recognised, the protection system releases
the engine lock. When you press the START (2, fig. 31)
button, the engine will start up.
2) if the motorcycle diagnostics warning light (9, fig. 4)
comes on and if, when you switch the button (1, fig. 8) to
the “▼” position, the “Error IMMO” message appears on
the display, the code has not been recognised. In this case,
turn the ignition key back to OFF and then to ON again. If the
engine still does not start, try again with the other black key.
If the engine still does not start, contact the DUCATI Service
network.
Warning
Sharp knocks can damage the electronic components
inside the key.
Always use the same key throughout the procedure.
Otherwise, the system might be prevented from
recognizing the code of the key being used.
Duplicate keys
If you need additional keys, contact your DUCATI Service
Centre with all the keys you have in your possession and
your CODE CARD.
DUCATI Service will program new keys and re-program
your original keys (up to a maximum of 8 keys).
DUCATI Service may ask for proof that you are the
legitimate owner of the motorcycle.
The codes for any keys not present during the memory
programming procedure are cancelled, to ensure that any
keys that may have been lost can no longer be used to
start the engine.
Notes
If you sell your motorcycle, do not forget to give all
keys and the CODE CARD to the new owner.
