43
E
Clutch lever
The lever (1) disengages the clutch. The span adjuster (2)
serves to alter the distance of the lever from the handlebar.
Lever distance is adjusted by 10 clicks of the knob (2).
Turn the knob clockwise to move the lever away from
twistgrip, or counter clockwise to move it closer.
When the clutch lever (1) is operated, drive from the engine
to the gearbox and the rear wheel is disengaged. Correct
use of the clutch lever is very important in all riding
situations, especially when moving off.
Warning
Set the clutch and brake lever with the motorcycle
stopped.
Important
Using the clutch properly will prolong the life of the
engine and prevent any damage to components in the
transmission.
Notes
It is possible to start the engine with the side stand
down and the gearbox in neutral. When starting the
motorcycle with a gear engaged, pull the clutch lever
(in this case the side stand must be up).
2 1
fig. 30
