82
E
Checking the chain tension (fig. 70)
Important
Have the chain tensioned at a Ducati Dealer or
Authorized Workshop.
With the motorcycle on the side stand, press down the
chain with a finger. Then release and measure the distance
between the surface of the shoe and the centre of the pin
below it. The reading should be between 33 and 35 mm.
Warning
Correct tightening of the tensioner counter nuts (1) is
essential for rider safety.
Important
An incorrectly tensioned chain will cause the rapid
wear of transmission parts.
Lubricating the drive chain
The chain fitted on your motorcycle has O-rings that keep
dirt out of and lubricant inside the sliding parts.
So as not to damage these seals when cleaning the chain,
use special solvents and avoid aggressive washing with
high-pressure steam cleaners.
After cleaning, blow the chain dry with compressed air or
wipe with an absorbent material, then lubricate each link
with SHELL Advance Chain or Advance Teflon Chain.
Important
Using non-specific lubricants may cause severe
damage to the chain and the front and rear sprocket.
.
33รท35 mm
fig. 70
