A SERVICE OF

logo

Open as PDF
next previous
86
E
Rear turn signal indicators (fig. 74)
To change the rear turn signal indicator bulbs, give the
indicator body (1) a quarter turn, hold it with the lens
upward and take it out of the indicator support.
The bulb has a bayonet-type end fitting: to remove it, push it
in and turn it counter-clockwise. Push in the new bulb and
turn it clockwise until it clicks into place. Refit the indicator
body (3) to its support and rotate it by a quarter of a turn.
Number plate light (fig. 75)
To access the number plate light bulb, unscrew the screw (3)
securing the cover (4). Remove the bulb and replace it.
4
3
fig. 75
1
2
fig. 74