CLI commands
wpa-psk
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
wpa-psk <key>
Sets the WPA preshared key.
no wpa-psk
Deletes the WPA preshared key.
Parameters
<key> Specify a key that is between 8 and 63 alphanumeric characters in length. It
is recommended that the preshared key be at least 20 characters long, and
be a mix of letters and numbers. The double quote character should not be
used
Description
The service controller uses the key you specify to generate the TKIP keys that encrypt the
wireless data stream. Since this is a static key, it is not as secure as the RADIUS option.
authentication server request radius cui
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
authentication server request radius cui
Include in the authentication request a request for a CUI.
dot1x session page
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot1x session page
IEEE802dot1x authenticated users will be presented with the Session page and the Welcome page
after a successful authentication.
no dot1x session page
IEEE802dot1x authenticated users will NOT be presented with the Session page and the Welcome
page after a successful authentication.
wireless filters
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
wireless filters
Enables the wireless security filters which only allow traffic to flow between the service
controller and a specific upstream device (such as a service controller).
no wireless filters
Do not limit traffic flow between the service controller and an upstream device.
This prevents wireless users from accessing resources on the backbone LAN that interconnects
the service controller and the upstream device.
2-91
