CLI commands
no dot1x authentication
Disable support for IEEE802.1X.
dynamic vlan
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dynamic vlan
Enable dynamic VLAN.
no dynamic vlan
Disable dynamic VLAN.
egress rate
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
egress rate <(128k|256k|512k|1m|2m|4m|8m|16m|32m)>
Set the maximum rate at which this port will accept egress traffic.
use egress rate
Limit the egress data rate.
no use egress rate
Do not limit the egress data rate.
force flow control
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
force flow control
Force flow control on this port.
no force flow control
Do not force flow control on this port.
ingress rate
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ingress rate <(128k|256k|512k|1m|2m|4m|8m|16m|32m)>
Set the maximum rate at which this port will accept ingress traffic.
use ingress rate
Limit the ingress data rate.
no use ingress rate
Do not limit the ingress data rate.
ingress traffic type
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ingress traffic type (broadcast | multicast+broadcast | all)
Select the type of traffic to which rate limiting applies.
2-161
