Revision 1.4.16a Page 171
Figure 191 – Custom Tank Level Calibration Confirmation Screen
6.23.4.2 American Standard Sender Calibration
If you have a rectangular tank, and a sender with the standard American resistance range (240 ohms
full, 33 ohms empty), and you know the capacity of the tank, you can easily calibrate the sender by
using the “Set to American Standard (240-33 ohm)” menu item. Figure 192 below shows this option
highlighted. Use the Scroll Up ( ) or Scroll Down ( ) keys to move the highlight over this menu
item, and then press the Enter key ( ) to write the calibration values within the TLA100 and
complete the calibration process.
Figure 192 – American Standard Sender Calibration
6.23.4.3 European Standard Sender Calibration
If you have a rectangular tank, and a sender with the standard European resistance range (0 ohms
full, 180 ohms empty), and you know the capacity of the tank, you can easily calibrate the sender by
using the “Set to European Standard (0-180 ohm)” menu item. Figure 193 below shows this option
highlighted.
Use the Scroll Up ( ) or Scroll Down ( ) keys to move the highlight over this menu
item, and then press the Enter key ( ) to store the calibration values within the TLA100 and
complete the calibration process.
