Cooling and mechanical construction
series is cooled by internal fans. At the installation, care must be taken to allow free
ower supply via the front panel and out of the power supply via the rear panel. The
power supplies have a compact and lightweight package, which allows easy installation
and space saving in the application equipment.
The following accessories are delivered with the power su
1.3.1.1 Serial Link Cable
Serial link cable for linking power supplies by RS
485 communication.GEN/RJ45.
Cable description: 0.5m Length, shielded, RJ
1.3.1.2 Hardware (delivered with power supply)
Strain Relief for AC Cord
DB25 Programming Plug kit (AMP 749809
No Power Cord is Provided.
1500W Only Input Connector
plug kit (Phoenix Contact, plug: IMC 1,5/7
1.3.2 Optional Communication Cables (See Para. 7.5)
232 Cables to connect GEN to Serial Port on PC
485 Cable to connect GEN to Serial Port on PC
AC Cables are provided with 750W Model only, according to suffix in Model Number.
13A 125V, unshielded, 2m typical length, with IEC320 connector on one end and NEMA
15P connector on the other end.
10A 250V, unshielded, 2m typical length, with IEC320 connector on one end and INT’L 7
10A 250V, unshielded, 2m typical length, with IEC320 connector on one end and unte
minated stripped wires on the other end. Use the cable only with plug a
national safety standards of the countr
unshielded, 2m typical length, with IEC320 connector on one end and Japan
type plug on the other end.
10A 250V unshielded, 2m typical length, with IEC320 connector on one end and UK type
power supplies the recommended AC cable (customer supplied) is:
25A 250V, 3x12AWG, outer diameter: 9
C min., 3m max. length. Add a
locking plug approved by the national safety standards of the coun
Observe all torque guidelines within this manual. Over
Unit or accessories. Such damage is not covered under manufacturers warranty.
