Agilent Technologies E4403B Water Dispenser User Manual


 
34 Chapter 1
Agilent E4403B Specifications and Characteristics
Inputs and Outputs
Agilent E4403B Specifications and
Characteristics
Specifications Supplemental Information
10 MHz REF IN
Connector BNC female Note: Analyzer noise
sidebands and spurious
response performance may be
affected by the quality of the
external reference used.
Impedance 50 , nominal
Input Amplitude Range 15 to +10 dBm, characteristic
Frequency 10 MHz, nominal
Specifications Supplemental Information
GATE TRIG/EXT TRIG IN
Connector BNC female
External Trigger Input
Trigger Level Selectable positive or negative
edge initiates sweep in EXT
TRIG mode (5 V TTL)
Specifications Supplemental Information
GATE/HI SWP OUT
Connector BNC female
High Sweep Output
Level
High = sweep
a
; Low = retrace
(5 V TTL)
a. High sweep may be high longer than the indicated sweep times.
Specifications Supplemental Information
VGA OUTPUT
Connector VGA compatible, 15-pin mini
D-SUB
Format VGA (31.5 kHz horizontal,
60 Hz vertical sync rates,
non-interlaced) Analog RGB
Resolution 640 × 480