AR-6G Rotisserie Operation & Care Manual • 5
INSTALLATION
AR-6G Rotisserie Operation & Care Manual • 5
NOTE: Note dimensions required for doorways and
aisles for access of the appliance and pallet to
the installation site. Transport the appliance
in an upright and level position only. Do not
tilt the appliance.
SITE INSTALLATION
®
DANGER
IMPROPER INSTALLATION,
ALTERATION, ADJUSTMENT,
SERVICE, OR MAINTENANCE COULD
RESULT IN SEVERE INJURY, DEATH,
OR CAUSE PROPERTY DAMAGE.
READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.
DANGER
AVERTISSEMENT : UNE INSTALLATION,
UN AJUSTEMENT, UNE ALTÉRATION,
UN SERVICE OU UN ENTRETIEN NON
CONFORME AUX NORMES PEUT CAUSER
DES DOMMAGES À LA PROPRIÉTÉ, DES
BLESSURES OU LA MORT.
LIRE ATTENTIVEMENT LES DIRECTIVES
D’OPÉRATION ET D’ENTRETIEN
AVANT DE FAIRE L’INSTALLATION, OU
L’ENTRETIEN DE CET ÉQUIPEMENT.
CAUTION
THE APPLIANCE MUST REMAIN ON
THE PALLET WHILE BEING MOVED
TO THE INSTALLATION SITE BY FORK
LIFT OR PALLET LIFT TRUCK.
TECHNICAL COMPONENTS
SPITS MOTOR SWITCH
Number 6 Number 3
Usable length 37" (940mm)
BULBS
DRIVING MOTORS
120V, 60W, INCANDESCENT 3
Number 6 12V, 20W, HALOGEN 3
Voltage, unit power 120V/60Hz
POWER CORD PLUG TYPE
GAS BURNERS
2 prongs + ground
NEMA 5-15P
15A, 125V PLUG
Type: direct flame Yes
CAPACITY
Number 3 Bird 144 lb / 168 lb
UNIT POWER RATING TOTAL ELECTRIC
Propane 195,000 BTU Consumption 6 AMPS
Natural 195,000 BTU