Filter
Top Products
I N S TA L L AT I O N
AR-7E Rotisserie Operation & Care Manual • 7
1
2. Apply high-temp silicone to seal where the lower
weldment attaches to the bottom panel (H). Attach
lower weldment with 6: 8-32 x 1/4" screws.
13. Inside the left side of the upper unit, install the upper
exhaust weldment routing it out the top of the upper
unit and then mating it with the lower exhaust
weldment using the rubber hose and hose clamps.
14.
208-240V, 1PH - RH/LH DOOR SWING:
Reattach strain relief bushing and strain relief
washer with rivets to upper unit at knock out
holes A & B.
208-240V, 3PH & 380-415V - RH/LH DOOR SWING:
Reattach strain relief bushing to upper unit at
knock out holes A & B.
1
5.
208-240V, 1PH - RH/LH DOOR SWING:
Attach additional strain relief bushing and strain
relief washer with rivets to lower unit at knock out
hole C.
208-240V, 3PH & 380-415V - RH/LH DOOR SWING:
Attach additional strain relief bushing to lower
unit at knock out hole C.
16. 208-240V, 1PH & 3PH - RH/LH DOOR SWING:
Attach the 14' (4,267 mm) power cord to the
terminal block of upper unit using ring connectors.
380-415V - RH/LH DOOR SWING:
No power cord supplied, proceed to step 17.
17. Replace the side panels on both units.
S TA C K IN G I NS T RU C TI O NS ( C O NT I NU E D)
3
6
5
4
8
2
1
9
15
13
B
E
A
D
C
F
8
7
14
12
10
12
11
H
18
16
17
ITEM
NO
.
PART NO. PART DESCRIPTION QTY
1 1010092 BRACKET, SUPPORT, BASE 4
2 1010464 PLATE, COVER, CORD HOLE 1
3 5009985 WELDMENT, EXHAUST, LOWER 1
4 5009987 WELDMENT, EXHAUST, UPPER (RH) 1
5010061* WELDMENT, EXHAUST, UPPER (LH) 1
5 CL-22234 CLAMP, WORM GEAR, 40-60 HOSE 2
6 HO-27883 HOSE, 2" I.D. FDA; 0.25' (76mm)1
7 NU-2437 NUT, 1/4-20 HEX S/S 4
8 RI-2100 RIVET, BLIND, #44, S/S 6
9 SC-2191 SCREW, HEX HEAD, 5/16-18 X 1" LONG 16
10 SC-2459 8-32 X 1/4" PHIL SCREW 6
11 SC-27385 SCREW, 1/4-20 X 3/4" LG HEX HEAD 4
12 WS-22094 WASHER, 1/4", FLAT, 5/8 OD 18-8 SS 8
13 WS-22095 WASHER, 3/8" ID, 1" OD, FLAT 18-8 SS 16
14 WS-2294 LOCK WASHER 1/4" 4
15 WS-2867 LOCK WASHER 5/16" 16
16 CD-33841 CORD,14' (4,267 mm)
208-240V, 1PH 1
CD-3987* CORD, 14' (4,267 mm) 208-240V, 3PH 1
17 1002389 WASHER, STRAIN RELIEF 208-240V, 1PH 2
18 BU-33505 BUSHING, STRAIN RELIEF, INT 208-240V, 1PH 1
BU-33948* BUSHING, STRAIN RELIEF, 18mm-25mm
208-240V, 3PH 1
380-415V
1
REFERENCE
ONLY
AR-7E OVER AR-7E STACKING ASSEMBLY (5009981 SHOWN)
*NOT SHOWN