Filter
Top Products
MN-35207 • Gas Fryer Operation & Care Manual • 16
OPERATION
Product Key
Programming
10 button controllers have a single, dual-purpose display that will alternate
information; for example:
then
ENTER PROGRAMMING
MODE.
Press and hold the P key for 3
seconds.
Press the down arrow key.
PROGRAM will be displayed.
Press the P key.
Operating Instructions
Controller is in Product Key Programming Standby
mode.
Stage cooking time.
Stage cooking temperature.
Stage timing mode (flex or straight).
Controller is in System Programming Standby Mode.
Controller is in Fahrenheit or Celsius Programming
Mode.
Controller is in Operating Mode. Actual vat temperature
is more than 10 degrees below the programmed vat
temperature.
Controller’s probe is either open or shorted. Display will
be accompanied with an audible alarm if shorted.
Check or replace the probe.
RECIPE
PROGRAMMING
CODE
(left A, right A,
left B, left D)
MANAGER
Controller is in Operating Mode. The actual vat
temperature is more than 10 degrees below the
programmed vat temperature.
Controller’s probe is either open or shorted. Display
will be accompanied with an audible alarm if shorted.
Check or replace the probe.
Controller is in Product Key Programming Standby
mode.
Controller is in System Programming Standby Mode.
Stage cooking temperature.
Controller is in Fahrenheit or Celsius Programming
Mode.
Stage cooking time.
Stagetimingmode(exorstraight).
10-button controllers have a single, dual-purpose display that will
alternateinformation;forexample:
TIME then 2:00
ENTER PROGRAMMING
MODE.
Press and hold the
key for
3 seconds.
Press the down arrow key.
PROGRAM will be displayed.
Press the
key.
PRODUCT KEY PROGRAMMING