Filter
Top Products
INSTALLATION
PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE INSTALLATION:
Carton or other heavy material for covering the counter top.
Clear tape
(for taping the templates to the wall)
Stud finder or thin nail.
Saber saw (for cutting vent
holes for roof or wall venting)
Phillips screwdriver (for the screws)
Pencil _ _,
Flat blade screwdriver (for the toggle bolts)
r--.,_=---a_J
Keyhole saw (for the power cord hole)
3/8" and 3/4" wood drill bits ,__.
1/2" and 3/16"
drill bits
Plumb line
I
Measuring tape (metal preferred) Duct Tape
Small side cutters or tin snips Caulking gun
• If you have brick or masonry walls, you will need special hardware and tools.
• The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft damper.
10