Filter
Top Products
AP24BC250-3, AP24BCF300-3, AP40BC350-3, AP40BCF450-3 Manual
20
A
fter about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
r. Press the
button (for shock freezers only).
The LED for "SHOCK" will be steady "ON".
s. To change the temperature, press or
then press
.
-25 Blinks
t. To change the temperature, press or
then press
.
-15 Blinks
u. To change the temperature, press or
then press
.
0 Blinks
v. To change the temperature, press or
then press
.
-4 Blinks
w. To change the temperature, press or
then press
.
3 Blinks
The display will show:
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
LOW AIR TEMPERATURE
-25 °F
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
HIGH AIR TEMPERATURE
-15 °F
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
FOOD TEMPERATURE
0 °F
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
HOLDING LOW TEMP
-4 °F
PARAM. PROGRAMMING
AUTOMATIC SHOCK CYCLE
HOLDING HIGH TEMP
3 °F
PARAM. PROGRAMMING
AUTO SHOCK CYCLE
PROGRAMMING COMPLETE
UV LIGHT CYCLE PARAMETERS PROGRAMMING
A
fter about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
x. Press the
button. The LED for "UV LIGHT"
will be steady "ON".
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE