Filter
Top Products
AP24BC250-3, AP24BCF300-3, AP40BC350-3, AP40BCF450-3 Manual
24
tt. To change the temperature, press or
then press
.
35 Blinks
uu. To change the temperature, press or
then press
.
42 Blinks
The display will show:
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HOLDING LOW TEMP.
35 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HOLDING HIGH TEMP.
42 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
PROGRAMMING COMPLETE
MANUAL SHOCK CYCLE PARAMETERS PROGRAMMING
After about 2 seconds the display will automatically
change to:
The LED for "M" will be "ON".
The LED'S for cycles will be blinking.
vv. Press the
button (for shock freezers only).
The LED for "SHOCK" will be steady "ON".
ww. To change the temperature, press or
then press
.
-25 Blinks
xx. To change the temperature, press or
then press
.
-15 Blinks
yy. To change the time, press or then
press
.
04:00 Blinks
zz. To change the temperature, press or
then press
.
-4 Blinks
aaa. To change the temperature, press or
then press
.
3 Blinks
PARAM. PROGRAMMING
MANUAL MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
LOW AIR TEMPERATURE
-25 °F
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
HIGH AIR TEMPERATURE
-15 °F
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
TOTAL TIME
H 04:00 MIN
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
HOLDING LOW TEMP.
-4 °F
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
HOLDING HIGH TEMP.
3 °F