Filter
Top Products
AP24BC250-3, AP24BCF300-3, AP40BC350-3, AP40BCF450-3 Manual
22
ee. To change the time, press or then
press
.
05 Blinks
The display will show:
PARAM. PROGRAMMING
HEATED PROBE CYCLE
HEATING TIME
05 SEC
PARAM. PROGRAMMING
HEATED PROBE CYCLE
PROGRAMMING COMPLETE
A
fter about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
ff. Press
to program the manual mode. The
"M" LED will be steady "ON" and the 6 "CYCLE
LED's" will all blink.
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
MANUAL SOFT CYCLE PARAMETERS PROGRAMMING
gg. Press
. The LED for "SOFT" will be steady
"ON".
hh. To change the temperature, press or
then press
.
28 Blinks
ii. To change the temperature, press or
then press
.
35 Blinks
jj. To change the time, press or then
press
.
01:30 Blinks
kk. To change the temperature, press or
then press
.
35 Blinks
ll. To change the temperature, press or
then press
.
42 Blinks
PARAM. PROGRAMMING
MANUAL MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
LOW AIR TEMPERATURE
28 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
HIGH AIR TEMPERATURE
35 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
TOTAL TIME
H 01:30 MIN
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
HOLDING LOW TEMP
35 °F
PARAM. PROGRAMMING
MANUAL SOFT CYCLE
HOLDING HIGH TEMP
42 °F