Filter
Top Products
AP24BC250-3, AP24BCF300-3, AP40BC350-3, AP40BCF450-3 Manual
29
ow steps 1 or 2 (above), EXCEPT in step 1.b (above) press To perform a hard chill cycle, foll
instead of .
. SHOCK FREEZE CYCLE
w steps 1 or 2 (above), EXCEPT in step 1.b (above) press
4
To perform a shock freeze cycle, follo
instead of .
. UV (STERILIZATION) CYCLE
, then press
5
a. To perform a UV cycle remove all food
the
(“UV LIGHT”) button.
b. Press the ("START/STOP") button to start the
UV cycle.
READY TO
START
Blinks
OPER
A
TING MODE
CHOOSE
OPERATING CYCLE
The display will show briefly:
03.07.2006 11:43 AM
UV CYCLE
READY TO START
STARTING CYCLE . . .
Then the display will now show:
29:59
Will count
do n to
w
00:00
A
03.07.2006 11:43 AM
UV CYCLE
UV TIME 29:59
fter 30 minutes the display will show:
The controller will beep for a few seconds.
COMPLETE
Blinks
The operator can now end this cycle by pressing ("START/ STOP").
03.07.2006 12:13 PM
UV CYCLE
COMPLETE
The display will show briefly:
STOPPING CYCLE . . .
Then the display will show:
OPERATING MODE
CHOOSE
OPERATING CYCLE
. DEFROST CYCLE
6