Filter
Top Products
AP24BC250-3, AP24BCF300-3, AP40BC350-3, AP40BCF450-3 Manual
25
The display will show:
A
fter about 2 seconds the display will automatically
change to:
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
MANUAL MODE
CHOOSE
PROGRAMMING CYCLE
NOTE: PROGRAMMING FOR "DEFROST", "UV" & "HEAT PROBE" WILL BE THE SAME IN
MANUAL MODE AS IT IS IN AUTOMATIC MODE (see pages 20-22).
3. RECIPE NAME PROGRAMMING
a. With the display reading "OFF", press the
button and hold it for 10 seconds.
b. Enter your password (see page 14), then press
.
c. Press or to change to the desired recipe
number (from 1 to 150), then press
which will
move you to the "NAME" line.
1 Blinks
d. Using or type the letters or numbers
required, then press
. To confirm the recipe
and go to the next one press
.
OFF
RECIPES PROGRAMMING
ENTER PASSWORD
***
ENTER RECIPE NUMBER
1
ENTER RECIPE NAME
f
a mistake is made in writing a recipe, use to go to
the desired location and correct it using
or
. There is a blank space after number 9. It can be
used to add a space or delete a letter. Press
when the recipe is corrected.
To finish the recipe name programming press
(“ON/OFF”).
_ Blinks
ENTER RECIPE NUMBER
1
ENTER RECIPE NAME
CHICKEN_