Filter
Top Products
Chapter 1 DHCP Service 11
7 Enter a starting and ending IP address for this subnet range.
Addresses must be contiguous, and they can’t overlap with other subnets’ ranges.
8 Enter the subnet mask for the network address range.
9 Choose the Network Interface from the pop-up menu.
10 Enter the IP address of the router for this subnet.
If the server you’re configuring now is the router for the subnet, enter this server’s
internal LAN IP address as the router’s address.
11 Define a lease time in hours, days, weeks, or months.
12 If you wish to set DNS, LDAP, or WINS information for this subnet, enter these now.
See “Setting the DNS Server for a DHCP Subnet” on page 12, “Setting LDAP Options for
a Subnet” on page 13, and “Setting WINS Options for a Subnet” on page 13 for more
information.
13 Click Save.
Changing Subnet Settings in DHCP Service
Use Server Admin to make changes to existing DHCP subnet settings. You can change
IP address range, subnet mask, network interface, router, or lease time.
To change subnet settings:
1 In Server Admin, choose DHCP from the Computers & Services list.
2 Click Settings.
3 Select the Subnets tab.
4 Select a subnet.
5 Click Edit.
6 Make the changes you want.
These changes can include adding DNS, LDAP, or WINS information. You can also
redefine address ranges or redirect the network interface that responds to DHCP
requests.
7 Click Save.
LL2351.Book Page 11 Monday, September 8, 2003 2:47 PM