Filter
Top Products
Rotisserie/Convection Oven Operation
14
Screen Name Screen Description
Recipe Parameter
Selection
Appears when a recipe is selected and the EDIT button
is touched from the Recipe Edit Selection screen. This
screen is used to select a specific recipe parameter to
edit. Use the up and down arrow buttons to scroll
through the list of parameters and touch the parameter
you want to change. Touch the X button to return to the
previous screen.
Recipe Parameter
Edit
Appears when a recipe parameter is touched from the
Recipe Parameter Selection screen. This screen is used
to edit a specific recipe parameter. The editable
parameters are: Recipe name, Preheat Temp, Cook
Temp, Cook Time and Hold Temp. The left and right
arrow buttons are used to move the cursor under the
character to be changed. The up and down arrow
buttons changes the character as desired. The Preheat
Temp and Hold Temp parameters can be turned off by
scrolling the temperature below 150°. Touch the SAVE
button to save the changed parameter. Touch the X
button to abort all changes and return to the previous
screen.
Programming the Controller Using the Touchscreen Interface
Use the procedures below to edit a separate recipe or to change the basic controller configuration.
Edit a Recipe
1. Turn on the Main Power Switch. The Startup screen will briefly appear then the Controller Off screen will
display.
2. Touch anywhere on the touchscreen. The Recipe Selection screen will appear displaying a list of recipes.
3. Touch any recipe for 3 seconds. The Security screen will appear.
4. Use the up/down and left/right arrow buttons to enter the passcode and touch the GO button. The
Program Mode Selection screen will appear if a valid passcode is entered.
5. Touch the COOK PROGRAMS option. A Recipe Edit Selection screen will appear.
6. Highlight the recipe you want to edit using the up/down arrow buttons then touch the EDIT button. The
Parameter Selection screen will appear.
7. Use the up/down arrow buttons to view the recipe parameters and touch the parameter you want to edit.
The Parameter Edit screen will appear.
8. Change the parameter value using the left/right and up/down arrow buttons then touch the SAVE button
to save your changes. You will return to the Parameter Selection screen.
9. Repeat the process to change any other parameters.
10. Touch the X button as necessary to return to the Recipe Selection screen.