Filter
Top Products
UPS
UPS Property
This dialog box allows you to configure the UPS COM port, battery
replacement date, ... etc. Load Warning and Load Severity used to
prevent UPS overload (see the UPS hardware user manual). In general,
Load Warning will notify the user to reduce the UPS load, Load Severity
will shutdown the computer to prevent overload.
a. COM Port: COM1, ...COM4, USB.
b. Load Warning: Load warning.
c. Load Severity: User must reduce UPS load.
d. Last Battery Replacement Date: Records the last battery replacement
date.
e. Next Battery Replacement Date: Displays the date of the next battery
replacement, Bulldog Plus will notify the user to replace the battery.
f. Host Name: Local host name.
Attached Devices
Allows the user to assign the attached device a name. When you're
controlling the outlet, Bulldog Plus will let you know which devices you are
controlling.
a. Select an Outlet Group: Assigns an outlet group. Please look at the
back panel carefully, some outlets may share one control relay, these
outlets are called an outlet group. If you turn off the outlet group (for
example: outlet1 and outlet2) then the UPS will stop power to the outlet
group outlet1and outlet2.
b. Device Name: Assigns the attached devices a name, for example:
Outlet Group1 is called Monitor for association with the monitor and Outlet
Belkin Components
23