Filter
Top Products
Bottom Layer Buttons
Each button shows the respective information in the Information Area
Main: General Information about the UPS.
Tree: There are 2 sub-trees in the Bulldog Plus tree: System and UPS. The
system tree is for host information and the status of Master/Slave connection,
the UPS tree is for all other UPS information.
Time: Displays the time for all schedules, battery replacement date and
countdown time.
Status: UPS status.
Diagram: Indicates the UPS current flow.
Scroll: UPS data graph.
Outlet: Displays outlet status. (If your UPS cannot control the outlet then this
button disappears)
Network: Indicates the connection of Master/Slave, Bulldog Monitor and
Bulldog Service.
Main
UPS Health: 3 levels: Green, yellow and red.
UPS Type: On line, off line, line interactive or 3 phase on line.
UPS Model: The UPS model, which is being monitored by Bulldog Plus.
Firmware Version: Indicating the version status of the UPS internal code.
Host Name: The host, which runs Bulldog Plus.
Rating VA: The UPS rating VA.
Rating Input Voltage: The UPS rating input voltage.
Rating Current: The UPS rating current.
Rating Battery Voltage: The UPS rating battery voltage.
Rating Input Frequency: The UPS rating input frequency.
Test Result: Results of the last self-test.
AC Source: Normal, battery or bypass.
Battery Status: The status of battery.
Battery Level: Percentage of battery level.
Loading: Output loading percentage.
Bulldog Plus with the ability to change the display item of the meters, the
Belkin Components
41