Filter
Top Products
You also need to specify the SNMP Trap target hosts and community
string, please see the SNMP dialog box in the Network menu.
Action - Receptacle Control:
Allows you to control the Receptacle Relay on or off. Each Receptacle
Relay may control not only one outlet, please see the rear panel of your
UPS or the UPS hardware user's manual.
Stop All Action
Clicking on this, terminates all the actions immediately.
Voltage Sensitivity
Adjusts the UPS voltage sensitivity.
Transfer Voltage
Changes the low transfer voltage and high transfer voltage. This function
lets your UPS adjust to the local power environment.
a. Low Transfer Voltage: When utility power voltage drops lower than the
assigned value the UPS will switch to backup mode. The output power is
supplied from the battery.
b. High Transfer Voltage: When utility power voltage rises higher than the
assigned value, the UPS will switch to backup mode. The output power is
supplied from the battery.
Belkin Components
28