Filter
Top Products
SNMP
If you are using a Windows 95/98/Me operating system, you can
configure the SNMP parameters directly from the Bulldog Plus:
Select the Accept SNMP packet from any hosts, Bulldog Plus will accept
all the requested commands and set commands. When you select the
Accept SNMP packet from the following hosts, Bulldog Plus receives
information only from the hosts that you assigned. Once a power event
has occurred and the user enables the SNMP Trap in the Action dialog
box, Bulldog Plus will send the SNMP trap to the hosts that are listed in
the Trap Target list box. To add, modify or delete the host, click on its
respective command button.
If you are using a Windows 2000/XP/2003 operating system, you
must install the SNMP Service and configure the SNMP parameters
from your operating system:
Bulldog Plus will ignore the values that were set in the SNMP dialog box.
To change the parameters of SNMP function, you should install the
SNMP Service in the Network option. Select the SNMP Service from the
Network option in the Control Panel and click the Property button to do
your changes.
Belkin Components
32