Filter
Top Products
Maintenance
23
Cleaning
Every 12 Months:
A factory authorized service person should:
1. Open and clean the inside ofthe controlpanel.
2. Check and tighten all electrical connections.
3. Check DC gear motor brushes for wear.
4. Check the drive belt for cleanliness.
5. MT1828G --- Lubricate the combustion air
blower motor with six drops of Anderal #465
oil
If maintenance is required contact your local s er-
vice company, a factory representative or the
Blodgett Oven company.
WARNING!!
Alway s disconnect the power supply b e-
fore cleaning or servicing the oven.
WARNING!!
If the oven needs to be moved, the gas
must be turned off and disconnected from
the unit before removing the restraint. Re-
connect the restraint after the oven has
been returned to its original location.