Filter
Top Products
4
BISTRO
INSTALLATION
– Always place the stand mixer on a stable, level surface.
This may not be hot and must not be near to a source of
heat. The surface must be dry. Keep the appliance and the
power cord out of the reach of children.
– Check that the voltage indicated on the appliance rating
plate matches the voltage of the power supply in your
region. Only connect the appliance to a proper socket
with a power output rating of at least 6A and a voltage
of 220–240V~ 50/60Hz (EURO) or 120V~ 60Hz (USA).
(Consult an electrician if you are using a residual-current
device (RCD).) The socket must be easily accessible in an
emergency when the appliance is in operation. The manu-
facturer cannot assume any liability for accidents caused
by faulty or inadequate electrical earthing of the appliance.
– Have a qualified electrician replace the socket if it is not
suitable for the appliance‘s plug.
PLEASE KEEP THESE
INSTRUCTIONS SAFE FOR
FUTURE REFERENCE
Separate accessories from BODUM are available for this
stand mixer on our website or in our stores. For detailed
installation and application guideline please refer to the IB
of the accessory.
STAND MIXER PARTS LIST
1 Mixing arm
2 Bowl
3 Insertion opening for mixing attachments
4 Speed control
5 ON/OFF switch
6 Release lever for the mixing arm
7 Base
8 Beater attachment (1 piece)
9 Dough hook attachment (1 piece)
10 Whisk attachment (1 piece)
11 Splash guard with filler opening
SPECIAL INFORMATION
POWER CORD
– An extension cable may be used provided all appropriate
precautions are taken.
– When using an extension cable, the rated power values of
the extension cable must be equal to greater than that of