Filter
Top Products
English 3
Element ‘ON’ Indicator Light The element “ON” indicator light glows whenever any element is turned on. The
light remains lit until all of the elements are turned off.
The “ON” light is located in front of the control knobs.
For dual elements there is an additional "ON" indicator light located at the top left
of the control knob. This light glows when both the inner and outer elements are
being used and the element is on. When using a setting other than 9 (High), the
light will cycle on and off as the element cycles.
Figure 2 - On Indicator
Hot Surface Indicator Light Each element features a hot indicator light to show when the cooking surface is
too hot to touch. The signal light will turn on automatically in the area marked
CAUTION - HOT at the center front. The light remains on until the cooking area
has cooled to a safe-to-touch temperature.
If a hot surface light is on, use caution when working or cleaning around the cook-
top as the cooktop is still hot.
Figure 3 - Hot Surface Indicator
Control Knobs The controls on the cooktop are marked to show which element they control. All
controls are marked from 1-9, with 1 being the lowest heat setting and 9 the high-
est setting.
Using the Cooktop
Before Using the
Cooktop for the
First Time
• Remove all packing materials and literature from the cooktop surface.
• While cool, wipe with a clean, damp sponge and dry.
• Apply the Cooktop Cleaning Creme® packaged with the cooktop. Buff with a
clean cloth.
• There may be a slight odor during the first several uses; this is normal and will
disappear.
• Optimum cooking results depend on the proper cookware being selected and
used.
• The cooking surface will hold the heat and remain hot up to 25 or 30 minutes
after the elements have been turned off.
• Read all safety precautions and Use and Care Manual information prior to
operating.
ON
Caution - Hot