Filter
Top Products
10
OPERATING YOUR BREVILLE LIGHT & MIGHTY
NOTE
The blending blades are extremely
sharp. Avoid any contact with fingers
and hands.
ASSEMBLING AND ATTACHING
THE BLENDER JUG
1. Place the motor base on a flat, dry surface
such as a bench top. Ensure the speed
selection dial is in the OFF position, the
appliance is switched off at the power
outlet and the power cord is unplugged.
2. Ensure the lid is off the blender jug and
place the blender jug upside down on a
flat, dry surface such as a bench top.
3. Place the silicone seal onto the narrow
end of the blender jug so that the seal
sits underneath the 3 tabs.
4. Carefully insert the blade assembly.
5. Place the two tabs of the blade
assembly tool into two grooves of the
blade assembly.
6. Use one hand to hold the jug handle
and the other to turn the assembly tool
clockwise to secure into place.
7. Turn the assembled blender jug upright
and place onto the motor base.
8. Insert the inner measuring cup into the
lid, then insert the lid firmly into the top
of the blender jug.
NOTE
Ensure lid is placed onto blender
jug firmly and the inner measuring
cup is in position before operating
the blender. Do not operate blender
without the lid. Additional ingredients
can be added whilst blending by
removing the inner measuring cup
and placing or pouring ingredients
through the middle opening in the lid.
NOTE
Liquids should be placed into the
blender jug before solid ingredients,
unless specified differently in a recipe.
NOTE
All foods should be cut into cubes
(approx. 2-3cm square) to achieve an
even result.