Filter
Top Products
11
OPERATING YOUR BREVILLE LIGHT & MIGHTY
USING THE BLENDER
NOTE
When using the blender for the first
time, you may notice an odour coming
from the motor. This is normal and
will dissipate with use.
1. Ensure the speed selection dial is in the
OFF position. Insert the power cord into
a 230/240V power outlet and switch on
at the power outlet.
2. Remove the lid and add food and/or
liquid into the blender jug.
3. Select the desired speed by turning the
speed selection dial clockwise to the low
or high speed setting. The speed can be
changed at any time during the blending
process. Turn the speed selection dial
anti-clockwise to select the Pulse setting.
Low: suitable for savoury dips, thin batters
and soups.
High: suitable for smoothies, cocktails,
drinks, sauces and pesto.
Pulse: can be used for foods that require
short bursts of power to process such as
herbs, nuts (pesto), small vegetables and
ice. When using the Pulse function, hold the
blender lid in place.
NOTE
If any moisture or liquid appears on
the motor base, ensure the speed
selection dial is in the OFF position,
the appliance is switched off at the
power outlet and the power cord is
unplugged, remove the blender jug
then wipe the spillage immediately
with paper towel and dry thoroughly.
Ensure the blender jug is correctly
assembled before placing back onto
the motor body and operating.
4. During the blending process, some
ingredients may stick to the sides of the
blender jug. To push the food back onto
the blades, turn the speed selection dial
to the OFF position and switch off at the
power outlet. Remove the lid and use a
plastic spatula to scrape down the sides
of the blender jug. Replace the lid before
recommencing blending.
5. At the end of use, always ensure the
speed selection dial is turned to the OFF
position. Then switch the appliance
off at the power outlet and unplug the
power cord.
NOTE
Ensure the motor and blades have
completely stopped before attempting
to move the appliance, when not in
use, if left unattended and before
disassembling, cleaning and storing.