Filter
Top Products
15
Suggested uses your Breville ikon™ Blender
Trouble shooting guide
Problem Solution
Motor doesn’t start or blade doesn’t rotate Check that the blender jug and lid are securely into position.
Check that the ‘Power’ button and selected function or speed
setting is illuminated.
Check that the power plug is securely inserted into the
power outlet and switched on.
Food is unevenly chopped Either too much food is being blended at one time or the
pieces are too large. Try cutting food into smaller pieces of
even size and processing a smaller amount per batch.
For best results, the food should be chopped into pieces no
larger than 2cm.
Food is chopped too fine or is watery Blend for shorter period of time. Use ‘PULSE / ICE CRUSH’
function for more control.
Food sticks to blade and jug The mixture may be too thick. Try adding more liquid to the
mixture and / or use a slower speed.
Blender Overloaded
The motor is protected from burning out by an
automatic, temperature operated, cut-out switch. If
the blender is overloaded or operated continuously for
too long, the motor may overheat. If this happens, the
safety cut-out switch will prevent the blender from
operating. To operate the blender again, you must
switch off at the power outlet, unplug and allow to cool
for approximately 30 minutes. Once the motor has fully
cooled, it is ready for use again.
BBL550_IB_FA.indd 15 10/02/10 2:32 PM