Filter
Top Products
7
Before first use
Before using your Breville ikon™ Blender for
the first time, remove any packaging material
and promotional labels. Ensure the appliance is
switched off at the power outlet and the power
cord is unplugged.
Wash the lid, inner lid, blender jug and blade
assembly (refer to Disassembling the blender
jug on page 10) in warm, soapy water with
a soft cloth. Rinse and dry thoroughly. The
motor base can be wiped with a damp cloth.
Dry thoroughly.
When using your Breville ikon™ Blender
for the first time, you may notice an odour
coming from the motor. This is normal and will
dissipate with use.
The blending blades are extremely sharp.
Avoid any contact with fingers and hands.
Assembling and attaching the
blender jug
Step 1
Place the motor base on a flat, dry surface
such as a bench top. Ensure that the motor
base is switched off at the power outlet and
the power cord is unplugged.
Step 2
To assemble the blender jug, replace the silicon
seal onto the blade assembly (see page 11).
Upturn the blender jug and insert the blade
assembly on to the jug base (see Page 11).
Twist the Blade Removal System anticlockwise
until firmly locked into position.
Step 3
Turn the blender jug upright and insert onto the
motor base. The handle of the blender can be
positioned to the left or the right of the appliance.
Step 4
Add food or liquid into the blender jug ensuring
not to exceed the ‘Max’ mark. Place the blender
lid firmly into position on the top of the blender
jug. Insert the clear inner lid into the blender
and turn clockwise into position (see Fig 1)
Fig 1
When adding oil or other liquids during the
operation, turn the clean inner lid to the
unlocked position and pour through the small
holes on either side of the inner lid (see indents
for finger placement Fig. 1) The inner lid can
be removed to add ingredients or check the
texture of the ingredients.
The Breville ikon™ Blender features a Breville
Assist™ Lid. This allows the lid to fit tightly
onto the blender jug, avoiding displacement
during operation. The ring pull design allows
the user to easily remove the lid with a simple
leverage action. (See Fig 2)
Fig 2
Operating your Breville ikon™ Blender
BBL550_IB_FA.indd 7 10/02/10 2:31 PM