Filter
Top Products
8
Operating your Breville ikon™ Blender continued
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON™ BLENDER WHILST
THE MOTOR IS RUNNING
Step 5
Plug the power cord into a 230/240V power
outlet and switch on.
Step 6
Press the ‘Power’ button on the far left of
the control panel to turn the blender on. The
‘Power’ button will illuminate and flash.
Do not fill the blender jug above the ‘MAX’ line.
When the blender jug is filled at or near the
‘MAX’ line place one hand on the blender lid to
avoid displacement of the lid during operation
Step 7
Select the required speed (1 to 5) by pressing
the corresponding speed button. The blender
will start to operate and the selected speed
button will illuminate. The ‘Power’ button will
illuminate and cease to flash. The ‘Stop’ button
will illuminate and flash.
Operate the blender only for the appropriate
amount of time required – do not over blend.
Step 8
When 120 seconds is reached, the blender
will automatically cease to operate and the
selected speed button and ‘Stop’ button
illumination will go out. The ‘Power’ button will
illuminate and flash.
The ikon™ Blender will automatically stop
blending after 120 seconds (2 minutes). This
is a safety feature and restricts wear and
overuse on the motor.
To stop blending at any time, press the
‘Stop’ button or the selected speed button.
The ‘Power’ button can also be pressed, but
this will also turn the appliance off and all
illuminations will go out.
The speed can be changed at any time during
the blending process. Each time a new speed
is selected its button will illuminate and the
previous speed button illumination will go out.
BBL550_IB_FA.indd 8 10/02/10 2:31 PM