Filter
Top Products
12
13
OPERATING YOUR BREVILLE CORDLESS HAND BLENDER OPERATING YOUR BREVILLE CORDLESS HAND BLENDER
To select the desired speed:3.
a) For low speed, lightly depress the
Speed button.
b) For high speed, firmly depress the
Speed button.
NOTE:
Ensure the Power button is
depressed first.
Ensure the Power button has
been depressed for 1 second before
depressing the Speed button.
Ensure both the Power button
and Speed button are depressed
together.
CORDLESS HAND BLENDER
(STICK MIXER)
To detach the stainless steel
blending shaft
Ensure the Cordless Hand Blender is
switched off by keeping hands clear of the
Power button and Speed button. Unscrew
the blending shaft from the motor body in a
clockwise direction (See Fig. 1).
To attach the stainless steel
blending shaft
Hold the shaft with the blades down, and
align the top end of the blending shaft with
the corresponding end of the motor body.
Screw the shaft into the motor body in an
anti-clockwise direction.
THE STAINLESS STEEL ICE
CRUSHING BLADES ON
THE BLENDING SHAFT ARE
EXTREMELY SHARP, KEEP
FINGERS AWAY FROM THE
BLADES AT ALL TIMES.
To use the stick blender
Ensure the stick blender is completely and
properly assembled as detailed on the
previous page.
Place food to be processed into the 1.
mixing jug provided (or a sufficiently large
mixing bowl or saucepan). The mixing
jug provided should only be filled up to
the 'LIQUID MAX' mark when blending
liquids.
Place the blending shaft as deeply as 2.
possible into the mixing jug and depress
the Power button (top button) to turn the
Cordless Hand Blender on. While still
depressing the Power button, depress
the Speed button (bottom button). To
select the desired speed, the Speed
button should be lightly depressed for
low speed and firmly depressed for
high speed. Both the Power button and
the Speed button must be depressed
simultaneously for the required duration
of operation (see Fig. 2).
Work through the ingredients in the 3.
mixing jug with a gentle raising and
lowering motion.
!
Switch off the Cordless Hand Blender 4.
motor by releasing the Power and Speed
buttons.
Ensure the motor has completely 5.
stopped before lifting the Cordless Hand
Blender out of the mixing jug.
Recommendations when using
the Cordless Hand Blender as a
stick blender:
The Cordless Hand Blender blends foods 1.
and liquids rapidly, therefore it is easy to
over-process. Remember when using
the Cordless Hand Blender, check food
throughout operation.
The stainless steel blending shaft on 2.
the Cordless Hand Blender allows for
hot food to be processed directly in
the saucepan. This makes blending
soups and sauces very easy. For safety
reasons, remove the saucepan away
from the heat source before processing.
Ensure the Cordless Hand Blender is
kept away from any heat source.
When pureeing and blending, cut food 3.
into uniform sizes. This will ensure
smooth and consistent results.
Warm all liquids to be added to soups 4.
and purees, this will ensure even
blending.
Use the storage lid of the mixing jug as a 5.
non slip base for the jug during blending.
This will keep the jug stable.
Do not operate the appliance 6.
continuously for more than 60 seconds.
Allow the motor to rest for 1 minute
between each use.