Filter
Top Products
12
PAge heAder.....
ASSEMBLY AND OPERATION
ATTACHING THE BOWL
1. The stainless steel bowl can now be
attached to the mixer stand. Place the
bowl into the turntable and turning it to
the RIGHT (clockwise) until it locks into
place. (Product graphic on the stand will
show this).
ATTACHING THE BEATERS
1. Attach the beaters by pressing the TILT
button and lifting the hand mixer up
until it stops.
2. Insert the beaters into the correct socket
as shown on the front panel of the mixer
head. The beaters should be inserted
with a firm push until they click
into place.
NOTE
It is important that the two beaters are
fully inserted into their appropriate
sockets or your Breville Handy Stand
Mixer™ will not operate correctly.
ATTACHING THE DOUGH HOOKS
1. Attach the dough hooks by pressing the
TILT button and lifting the motor head
until it stops.
2. Insert the dough hooks into the correct
socket as shown on the underside of the
mixer head. The dough hooks should be
inserted with a firm push until they click
into place.
NOTE
It is important that the two dough
hooks are fully inserted into their
appropriate sockets or your Breville
Handy Stand Mixer™ will not
operate correctly.
CAUTION
Beaters/dough hooks must be inserted
into the correct sockets as they are
not interchangeable and incorrect
insertion will result in damage.
BEM600XL_IB_A12_FA.indd 12 21/06/12 10:25 AM