Filter
Top Products
14
PAge heAder.....
8. To turn the mixer on switch the ON/
OFF switch to the ON position. The
LCD shows "0" and the display is
flashing. The flashing light indicates
ready to operate. Avoid any contact
with the beaters, dough hooks or
moveable parts. Commence mixing by
pressing the (+) speed button to the
desired speed required. You will see the
speed of the mixer on the LCD screen
between the (+/-) speed buttons. Always
begin mixing at a lower speed setting
to prevent splattering. Increase to the
speed suited to the mixing task. The
speed setting can be adjusted during
operation by pressing the (+) or (-)
buttons. Use the mixing guide as
a reference.
9. To operate the motor base turn the dial
to your desired setting. You can choose
from OFF, LOW or HIGH.
10. Occasionally stop the mixer during
operation and scrape any food mixture
down the sides of the mixing bowl with
a spatula.
11. When mixing is completed, press the (-)
speed button until the LCD displays “0”
and switch the ON/OFF button to the
OFF position.
12. Unplug the power cord.
13. Press the TILT button and tilt motor
head back on the mixer stand.
14. Remove the beaters/dough hooks by
pressing the eject button on the front
panel of the mixer head while grasping
the shaft of the beaters.
NOTE
The beaters/dough hooks will be
released automatically. DO NOT try
to pull the beaters/dough hooks out of
the sockets. Use a spatula to remove
mixture from the beaters/dough hooks.
ASSEMBLY AND OPERATION
BEM600XL_IB_A12_FA.indd 14 21/06/12 10:25 AM