Filter
Top Products
13
PAge heAder.....
ASSEMBLY AND OPERATION
OPERATING YOUR BREVILLE
HANDY STAND
MIXER™ TWIN
BEATER ACTION
The Breville Handy Stand Mixer™ has 2
motors for superior and thorough mixing
result. One motor controls and drives the
beaters while the second motor drives the
bowl in the opposite direction.
1. Ensure that the ON/OFF switch is set in
the off position and that the motor head
is securely attached to the mixer stand
before using.
2. Insert the power cord into a 110/120V
power outlet and turn the mixer switch
to the on position.
3. Press the TILT button to lift the
motor head.
4. Insert the stainless steel mixing bowl by
placing it on the stand and rotating it in
the clockwise direction to the
locking position.
5. Insert the beaters or dough hooks into
the mixer head.
NOTE
There is a square and round beater.
Please ensure that the correct beater is
inserted in the appropriate slot, there
is a graphic on the under side of the
hand mixer to indicate which beater
goes in each slot. The round ended
beater is inserted on the left hand
side and the square ended beater is
inserted on the right hand side.
6. Add ingredients to the mixing bowl
supplied as listed in the recipe.
7. Press the TILT button to lower the
motor head down lowering in to the
locking position.
BEM600XL_IB_A12_FA.indd 13 21/06/12 10:25 AM