Filter
Top Products
15
PAge heAder.....
USING THE HAND MIXER
The hand mixer can be used on its own
(not on the stand) for smaller quantities of
ingredients or quick light tasks that need to
be mixed. To use the hand mixer without the
stand please follow the below instructions:
1. Press the TILT button and tilt motor
head back on the mixer stand.
2. On the inner side of the stand is a
mixer head release button. Press this to
remove the mixer head from the stand.
3. Ensure that the ON/OFF switch is set in
the off position.
4. Add ingredients to the mixing bowl
supplied as listed in the recipe.
5. Insert the power cord into a 110/120V
power outlet.
6. Insert the beaters or dough hooks into
the mixer head.
NOTE
There is a square and round beater.
Please ensure that the correct beater is
inserted in the appropriate slot, there
is a graphic on the mixer to indicate
which beater goes in each slot. The
round ended beater is inserted on the
left hand side and the square ended
beater is inserted on the right
hand side.
7. To turn the mixer on switch the
ON/OFF switch to the ON position.
The LCD shows O and the display is
flashing. The flashing light indicates
ready to operate. Avoid any contact
with the beaters, dough hooks or
moveable parts. Commence mixing by
pressing the (+) speed button to the
desired speed required. You will see the
speed on the mixer on the LCD screen
between the (+/-) speed buttons.
8. Always begin mixing at a lower speed
setting to prevent splattering. Increase
to the speed suited to the mixing task.
The speed setting can be adjusted
during operation by pressing the (+) or
(-) buttons. Use the mixing guide as
a reference.
ASSEMBLY AND OPERATION
BEM600XL_IB_A12_FA.indd 15 21/06/12 10:25 AM