Filter
Top Products
11
ASSEMBLY & OPERATION
ASSEMBLING THE MIXER
Before using your Breville Scraper Mixer
Pro for the first time, remove any packaging
material and promotional labels. Ensure the
speed control dial is in the ‘Off’ position, the
mixer is switched off at the power outlet and
the power cord is unplugged.
Remove the mixing bowl, beater, whisk and
dough hook and wash in warm soapy water
with a soft cloth. Rinse and dry thoroughly.
The bowl and the attachments may be
washed in the dishwasher.
NOTE
When first using your Breville Scraper
Mixer Pro, you may notice an odour
coming from the motor. This is normal
and will dissipate with use.
ATTACHING THE BOWL
1. Place the mixer base on a level, dry
surface such as a bench top. The mixer
motor head should be in the horizontal
(closed) position. Raise the mixer
motor head by depressing the tilt
back hinge button.
2. Lift the mixer motor head up until it tilts
back and locks into the open position.
3. Insert the mixing bowl into the bowl
locking recess of the mixer stand and
turn clockwise until the bowl locks
securely into place.
NOTE
To remove or insert the mixing bowl,
the mixer motor head must be raised
and locked into the open position.