Filter
Top Products
13
ASSEMBLY & OPERATION
NOTE
If the mixer has not been used for 3
minutes it will automatically change
from 'Stand by mode' to a power
saving 'OFF mode' and the illuminated
LED will switch off. To exit 'OFF mode'
and begin mixing, turn the dial to the
selected speed or press one of the
count up/down timer buttons.
2. Add ingredients to the mixing bowl as
indicated in the recipe.
Always begin mixing by selecting a low
speed setting on the speed control dial.
This will prevent ingredients splattering.
Increase the speed as suited to the
mixing task. The speed setting can be
adjusted during operation by moving
the dial clockwise for the main mixing
settings. Use the mixing guide in this
booklet as a reference.
If necessary, stop the mixer during
operation and scrape any food mixture
down the sides of the mixing bowl with
a spatula.
NOTE
Always turn the Mixer off if you need
to scrape the bowl during use, and
then switch back on and continue
mixing.
THE COUNT-UP TIMER
The count-up timer is especially useful
to gauge mixing time. You can monitor
the time it takes to thoroughly mix the
ingredients, so that the next time you mix
the same ingredients you can set the count-
down timer for the specific time.
The count-up timer will automatically
begin counting up as soon as the dial is
rotated from ‘Off’ to one of the speeds.
When the dial is turned to "Pause" the total
time will be displayed on the LCD and will
flash. When the dial is turned to "OFF", the
LCD display will reset back to "0:00".