Breville BEM800 Slow Cooker User Manual


 
19
CARE, CLEANING & STORAGE
CLEANING AFTER USE
1. Always ensure the speed control dial
is in the ‘Off’ position, the mixer is
switched off at the power outlet and the
power cord is unplugged.
2. Remove the beater, dough hook or
whisk attachment and mixing bowl
from the mixer. Follow instructions in
the ‘Assembly and operation’ section of
this booklet.
3. Wipe the mixer motor head and
mixer stand with a soft, damp cloth
then dry thoroughly.
Wipe any excess food particles from the
power cord. Wash the bowl, beater, dough
hook, and whisk in warm soapy water with
a soft cloth or they can be washed in the
dishwasher. Rinse and dry thoroughly.
NOTE
Do not use abrasive scouring pads or
cleaners when cleaning the mixing
bowl, flat beater, dough hook or whisk
as these may scratch the surface.
Also ensure that the attachments
are not soaked in water for extended
periods of time, for example several
hours or overnight, as this may
damage the finish.
NOTE
Do not wash or immerse the mixer
motor head and mixer base in water
or any other liquid. Clean with a soft,
damp cloth and dry thoroughly. Do
not allow water or any liquid to enter
the gear system as damage may result.
SCRAPER BEATER
1. Wash the scraper beater in warm, soapy
water using a soft cloth or a soft bristled
brush. Rinse and dry thoroughly.
2. The Scraper Beater can also be washed
in the dishwasher (top shelf only).
3. A small bottle brush can be used to
clean inside the neck of the Scraper
Beater if needed.
STORAGE
Your Breville Scraper Mixer Pro should be
kept in a convenient position on your kitchen
bench top or in an accessible cupboard.
Always ensure the speed control dial is
in the ‘Off’ position, the mixer is switched
off at the power point and the power cord
is unplugged.
Store the mixing bowl in the bowl locking
recess in the mixer Base.
Place the attachments inside the mixing
bowl and lower the mixer motor head into
the horizontal (closed) position.
The motor head cannot be taken off the base
for any purpose.