Filter
Top Products
14
ASSEMBLY & OPERATION
THE COUNT-DOWN TIMER
The count-down timer is especially useful
for any recipe that specifies the length
of time ingredients should be mixed.
For example, if a recipe reads, “beat for 3
minutes,” you can set the count-down timer
to 3 minutes by pressing the up/down
arrows. After 3 minutes of mixing, an alarm
will sound and the motor will automatically
turn off. The count-down timer will flash
“OFF”. The control dial must to be rotated to
the “Off” position to reset the timer and to
continue mixing.
To set the count down timer, press the up or
down arrows until the desired mixing time is
displayed on the LCD screen.
NOTE
Press and hold the arrows down to
scroll through the timer setting
more quickly.
Rotate the dial clockwise to select the
desired speed and to begin mixing. When
the timer has finished counting down,
“0:00” will flash on the LCD screen and a
beep will sound to notify you that the time
has expired. The mixer will automatically
turn the motor off. The control dial must
be rotated to the 'OFF' position to reset the
timer and to continue mixing.
NOTE
The maximum time displayed on the
timer is 59:59 (fifty nine minutes,
fifty-nine seconds). The mixer will
automatically switch Off at 59
minutes 59 seconds. The control
dial needs to be rotated to the “Off”
position to reset the timer and to
continue mixing.
PAUSE MODE
While mixing, at any stage, you can rotate
the control dial to the “pause” setting. This
will turn the motor off and “pause” the
timer. This enables you to assess the mixing
progress or add additional ingredients
without effecting the timer.
For example, if you are mixing using the
‘count-up timer’ mode, you can rotate the
control dial from one of the mixing speeds
to “pause”. The mixer motor will stop and
the timer will “pause”. Once ready, you can
rotate the dial back to one of the mixing
speeds, the timer will continue to count-
up from the exact time it was paused.
Alternatively, if you have turned the mixer to
“pause” you can then reset the timer to 0:00
by rotating the dial to “Off” position.
If using the “pause” function in ‘count-
down timer’ mode, you can suspend the
timer at any stage during the count-down
process by rotating the control dial to the
“pause” setting. To continue mixing in the
‘count-down timer’ mode, simply rotate the
dial back into one of the mixing speeds or
alternatively to the “Off” position to reset
the timer to 0:00.